Skip to main content

The shop will be CLOSED Sunday, March 31st!

Happy Easter!

Filter By:

  • Show More Brands

  • Show Fewer Brands

Pedals

$17.10
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$23.00
- The ATAC 13/17° cleat works with all TIME mountain pedals. - Included with all mountain pedal models numbered "6" and higher - Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe - Compatible with all two-hole cycling shoes.
$23.00
- The ATAC EASY 10° cleat works with all TIME mountain pedals. - Included with mountain pedal models numbered "2" and "4." - Release angle of 10 degrees and is compatible with all two-hole cycling shoes. - Don't let the "Easy" name fool you. If you are a high-performance rider looking to reduce the release angle from our 17 or 13 degrees, this is the choice for you.
$74.00
- Versatile and incredibly affordable. - The easy-to-clip-in ATAC system, large platform, and self-cleaning design make this the perfect choice for cyclists venturing off the road for the first time. - The ATAC EASY cleat makes for simple setup and clipping in and out even easier. - Pedal Material: Composite - Pedal Weight: 197g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16''
$95.00
- Oversized, hollow, steel axle, is lightweight yet rugged enough for any trail condition. - TIME's clamping system makes clipping in super easy. - Two release angle options (13° or 17°) along with a self-cleaning design that means you'll always be able to clip in – even in the muddiest of conditions. - Pedal Material: Composite - Pedal Weight: 190g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16''
$58.00
- At under 200 grams per pedal, the XC 2 is very versatile and incredibly affordable. - The easy-to-clip-in ATAC system, large platform, and self-cleaning design make this the perfect choice for cyclists venturing off the road for the first time. - The ATAC EASY cleat makes for simple setup and clipping in and out even easier. Specs: - Pedal Material: Composite - Pedal Weight: 151g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16''
$23.00
- Works with all XPRO and XPRESSO pedals. - Not included with new XPRO and XPRESSO pedals. - This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$23.00
- Developed for the TIME XPRO & XPRESSO road bike pedal range. - They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. - You can also adjust the Q-factor (by switching the cleats) - The Bi-material brings more durability when walking with the cleats. - These cleats are the stock cleats included with all XPRO & XPRESSO pedals.
$23.00
- Works with all RXS and Impact pedals. - Five degrees of heel float and 2.5mm of lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$23.00
- Pedal Grip pins/bolts and 4 tension screws TIME SPECIALE 8/12
$18.00
- Pedal Carbon blade Kit TIME XPro QTY 4
$69.00
- All of the technologies from the rest of XPRESSO line at an affordable price. - The large platform, low stack height, and adjustable carbon blade tension make this a great pedal for all cyclists looking for pedaling comfort and efficiency without a high cost. - If you're new to clipless pedals or have ever struggled to clip into your pedals, you'll love the ICLIC system, which features a pre-opened design that makes clipping in extremely easy. Specs: - Pedal Material: Composite - Pedal Weight: 115g - Cleat Compatibility: ICLIC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"
$90.00
- Built for everyday use and features a stainless steel top plate and a hollow, steel axle. - A low stack height, an oversized pedal platform, and a carbon blade with three tension settings make this a very comfortable and efficient pedal. - The ICLIC system requires only a light step to clip-in, making it a very easy pedal to enter. Specs: - Pedal Material: Composite - Pedal Weight: 115g - Cleat Compatibility: ICLIC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"
$132.00
- The only pedal in the XPRESSO line to use a carbon body. - Hollow steel axle is light and durable at the same time. - ICLIC system is a pre-opened design, making clipping in super easy. - Carbon blade tension adjustment, a low stack height, and an oversized platform for pedaling efficiency and comfort. Specs: - Pedal Material: Carbon - Pedal Weight: 99g - Cleat Compatibility: ICLIC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"
$317.00
- Carbon body and titanium axle. - Power transfer and stability are maximized with a large, 725mm surface area. - Bottom fairing to improve aerodynamics and protect the carbon blade. - TIME's patented preopened ICLIC system allows for fast and easy cleat engagement. - Tension adjustment on the carbon blade has three positions to precisely manage the pressure of the clamping mechanism. - Maximum rider weight of 90kg. Specs: - Pedal Material: Carbon - Pedal Weight: 94g - Cleat Compatibility: ICLIC - Spindle Material: Titanium - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"
$165.00
Time to take your eBike to the next level. With a pin layout derived from our downhill pedals for maximum grip, the ePedal is specifically designed for eBikes with its narrow profile for optimum cornering clearance. Compact cartridge bushings paired with a sealed bearing system keep things running smoothly for miles and miles. Topping it off is an electric design with full-coverage laser etching on a premium finish. - Body: CNC-machined 6061 Aluminum - Axle: CNC-machined Cro-Mo - Bearings: Ultralight compact bushings + sealed bearings - Replaceable pins - Size: 102mm x 108mm - Weight: 170g (each)
$124.99
The new OOZY Reboot Pedal - 100% the same award-winning OOZY Pedal platform that SPANK Industries has been manufacturing for years, but now with crank boot compatible axle and fresh new full colour anodized finishes for 2021. - Super slim 12mm for maximized pedal clearance - CNC weight-optimized trail pedal at 360g per set - Forged alloy body is shot-peened and anodized for increased durability - Equipped with hollow taper Chromoly steel axles for unmatched strength - Sealed bearings and IGUS bushings - 18 preassembled pins in virtual concavity for ultimate grip - Recommended for: ASTM 5, All mountain, enduro, trail, E-Bike - Crank boots compatible axle
$64.99
- Large platform 100mmx105mm size with concave profile combines support with ultimate grip - Strong and lightweight one piece alloy body - Forged chromoly axle delivers strength and durability - Shot-peen surface increases fatigue life and impact resistance
$114.99
- Crank Boot Compatible Axles - Full Anodized Finish - 12mm Thin—Massive 11x11cm Platform - Cold Forged Alloy Pedal Body - Hollow Taper Scandium Enriched Steel Axle - Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces - Chamfered Side Edges for Improved Cornering Clearance - Oversized Sealed Full Compliment Inboard Industrial Bearing - Sealed Outboard IGUS Bushing - 18 Adjustable Pins per Pedal - CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence - Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin
$89.99
- Full Anodized finish - 16-12mm concave platform - 100mm x 105mm platform - CNC Alloy Pedal Body - Hollow Taper Scandium Enriched Steel Axle - Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces - Oversized Sealed Full Compliment Inboard Industrial Bearing - Sealed Outboard IGUS Bushing - CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence - Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin
$89.99
- Full Anodized finish - 16-12mm concave platform - 110mm x 105mm platform - CNC Alloy Pedal Body - Hollow Taper Scandium Enriched Steel Axle - Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces - Oversized Sealed Full Compliment Inboard Industrial Bearing - Sealed Outboard IGUS Bushing - CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence - Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin
$64.99
- Large platform size with concave profile combines support with ultimate grip - Strong and lightweight one piece alloy body in eight color options - Forged chromoly axle delivers strength and durability - Shot-peen surface increases fatigue life and impact resistance - Material: Alloy - Platform Size (mm): 100 x 105 - Platform Profile: (mm) 16mm - Weight (g): ±395/set - Axle: Cold-forged Chromoly steel - Bearing/Bushing: Industrial bearing, IGUS bushing - Pins: 12 steel & 8 alloy pins per pedal - Virtual Concavity - Finish: Mottled / grunge anodized
$45.99
The Spoon Pedal Axle Rebuild kit includes the internal parts required to completely rebuild a set of Spoon pedals. - Pins available separately
$59.99
- 100% SDG DNA in the design of these pedals - Utilizes a flat profile which allows optimal grip for flat pedal shoes - Composite body design - Minimal 17mm pedal body height maximizes the pedal feel - 105mm x 110mm Platform - Ramped and undercut traction pad - 18 pins, replaceable, bottom loaded - Bearing/bushing design for maximum durability. Fully rebuildable pedal design - Cro-Mo axle
$51.99
- 90mm x 90mm Small Platform - Cro-Mo Axle - 6 rear loading, replaceable steel pins - Gripper profile for enhanced pedal traction - Fully sealed and lightweight DU bushing design
$51.99
- 90mm x 90mm Small Platform - Cro-Mo Axle - 6 rear loading, replaceable steel pins - Gripper profile for enhanced pedal traction - Fully sealed and lightweight DU bushing design - Pedal Weight: 310g
$49.99
Slater pedals from SDG. - 9/16" spindles - Composite/plastic - Platform
$129.99
The Best Of Both Metals The Aeffect pairs a thin, lightweight 6061-TI aluminum body with a cro-mo axel that runs our tried and true bearing and bushing set-up. Surefooted As A Mule You want traction? You got it. Bottom loading hex-head threaded pins give you all the bite and foot security you need. Your True Colors Shining Through Pick from three vibrant colors to compliment your build and your personal sense of style. Just don't choose wrong or they'll make fun of you. Get Up Stand Up Like a good trail dog, the Aeffect Pedal is most in its element on a flowy section of backwoods Nirvana. Designed with a smaller body, this strong, durable, rebuildable pedal is made to chase stoke all day long. Specs: - Axle Material: Chromoly Steel - Body Material: 6061 Aluminum - Material: 6061 Aluminum - Platform Height (MM):16.9 - # of Pins: 20 SHCS hex traction pins per pedal (10 per side) - Platform L x W (MM): 101 x 100 - Weight: 375g
$179.99
Low And Lean Made from super-strong 6061-T1 aluminum, the double concave body is sleek and light while still giving your foot a nice wide platform to stand on. Round And Round We Go Fully sealed 4-bearing design makes for smooth rolling rotations over an extremely long life. And the ability to rebuild makes it nearly unkillable. Ride Don't Slide Pins at the front and back of the pedal are angled slightly to provide improved traction and foot comfort. Because pedal bites suck. Look Good Ride Good Our top of the line pedals come in 6 different colors so that you can add as much flavor and flair to your ride as you like. Pedal Envy More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods. Specs: - Axle Material: Chromoly Steel - Body Material: 6061 Aluminum - Material: 6061 Aluminum - Platform Height (MM):14.5 - # of Pins: 20 SHCS hex traction pins per pedal (10 per side) - Platform L x W (MM): 114 x 101 - Weight: 355g
$59.99
Here For The Party A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing. The Full Meal Deal A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side. Not Just Another Axle Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up. Bling For Your Bike No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from. Specs - Platform Height: 18.4mm - # of Pins: 16 SHCS hex traction pins per pedal (8 per side) - Platform L x W: 101 x 110mm - Axle Material: Chromoly Steel - Body Material: Nylon Composite - Material: Nylon Composite - Weight: 360g
Page 1 of 2 Next page